AAAA Red Pyrope Garnet 10x8mm 2.81 Carats in Heavy 14K Yellow gold MAN'S ring 18 grams. 2555
Gemstone: Garnet (from Madagascar)
Treatments: Untreated
Specifications: 10x8mm, approx. 2.80 carats
Color: As shown
Clarity: Flawless
Cut: Portuguese cut
All of our rings are solid gold -- never hollow.
Metal: 18K yellow gold. (18K rose, 18K green and 18K white also available for no additional charge). If you would like to save some money this ring can be special ordered in 14K gold (any color). The cost savings will be approximately $250 and no more. Yes, there is less gold but 14K gold is harder to work with and so requires more labor to cast, finish and most importantly to bezel set the gemstone.
Also available in 21K, 22K, 24K gold and Platinum, contact us for prices.
Weight: 19.5 to 21 grams.
Ring size: This ring is available in all sizes from a low of 7 to a high of 12. Larger sizes are available up to a size 18, but will require an additional fee to cover the extra gold needed to keep the ring looking the same. Please contact us for details and price. If you do order the ring in an size greater that a 12 and up to a size 14 we will assume that you are comfortable with a thinner shank and a final weight of no more than 21 grams. If you would like to add more gold to the ring you have to contact us within three days of placing the order.
If you find that his setting is too plain we can always add diamonds to the ring or perhaps you have another great idea to embellish this ring to your taste and standards. I welcome any and all inquires so please feel free to contact me.
STONE SETTING: Please note that the center stone has not been fully set. In some listings a space will be seen between the edge of the stone and the bezel edge. I cast these rings to order so the dimensions of the stone and the ring size are adjusted prior to casting.
By casting the ring to order you can order the ring in whatever color you desire and most importantly the center stone can be perfectly and safely set in a ring cast for it. Heavy rings are very difficult to resize so by casting the ring in your size we eliminate any chance of distorting a ring.
This ring is also available as a mounting for your stone, or if you are looking for a particular gemstone please let us know we stock just about every type and if we do not have it we can source it for you.
The last images shows how the ring will be finished and in one of the smaller images you can see the ring on my hand. My little finger is a size 8 and has been added go give you a better sense of scale. I often make these rings for women, so if you are looking to have one made please contact me, I would love to make you a smaller version of this ring, or perhaps a bigger version of it, that is if that is what you would prefer.
This is as fine and elegant a man's ring as you will ever find. The perfect blend of a fine gemstone matched up with a clean classic 18K yellow gold ring. Good solid weight, nicely distributed to give the ring an even weight so that it will not spin. There is nothing worse than a top heavy ring that constantly spins, or flip flops back and forth. A good weighty ring should be balanced so that it stays in place. The beauty of the gemstone set in the 18K gold should be the feature that reminds you that it is there, not the awkward flip flopping of an unbalanced ring.
The base of the shank is approximately 4.5mm wide and rounded on the edges to make it comfortable. The inside of the ring is also solid with smooth sides to help prevent it from moving and most importantly to make the ring comfortable to wear. The widest part of the ring is approximately 11.5 to 12mm. The height of the ring is again approximately 6mm high. The weight of the ring will fall between 19.5 to 21 grams, and as with all the other approximations will vary a little because each of these rings is cast to order and finished by hand. The weight will also vary depending on the ring size you order.
The ring in the images is a size 9, so any larger size up to a size 12 will fall within the weight range. Anything smaller will be slightly lighter, and anything larger that a size 12 will still fall within the same weight range. The only variance will be in the thickness of the shank. The shank will never be less than 2.5mm which is still about 1mm thicker than most men's rings found anywhere else.
If it is important to you that the width of the shank stay thick then please let me know so that I can add more gold to the casting. There will be an additional fee for this service. This ring is available in all sizes, including quarter sizes. The listing is priced for any ring up to size 12, anything larger will require more gold and also more labor to make up a new ring in the larger size. Please contact me for prices and details. I make all these rings to order, so your ring will be cast in your size.
I try to set the center stone level with the top edge of the bezel. If you are interested in having the stone set as low as possible please let me know. I can also set the stone so that it comes in contact with the skin of your finger. Lowering the stone might reduce the overall weight of the ring by no more than 2 grams. Loss of gold weight offsets added labor cost to set your stone to your specs.
In designing this ring I have tried to match a good weight with a nice sized gemstone, not too big, yet not so small that you cannot see it. I have also set the stone deep into the bezel so that the raised edges can offer more protection to the glancing blows that often do the most damage to a large ring's gemstone.
This ring is shown in 18k yellow gold and is also available in 18K White, 18K Rose and 18K green gold. Each of these rings is made to order so there will be slight variations to the finished piece, but only to the overall corners and slopes of the ring. The primary look of the ring in the images will always be consistent. High thick raised bezel, solid shank, and of course the final gold weight which will be close to 20 grams. The thickness of the shank shall be no less than 2.5mm.
All metal is refined in-shop.
Gemstone: Garnet (from Madagascar)
Treatments: Untreated
Specifications: 10x8mm, approx. 2.80 carats
Color: As shown
Clarity: Flawless
Cut: Portuguese cut
All of our rings are solid gold -- never hollow.
Metal: 18K yellow gold. (18K rose, 18K green and 18K white also available for no additional charge). If you would like to save some money this ring can be special ordered in 14K gold (any color). The cost savings will be approximately $250 and no more. Yes, there is less gold but 14K gold is harder to work with and so requires more labor to cast, finish and most importantly to bezel set the gemstone.
Also available in 21K, 22K, 24K gold and Platinum, contact us for prices.
Weight: 19.5 to 21 grams.
Ring size: This ring is available in all sizes from a low of 7 to a high of 12. Larger sizes are available up to a size 18, but will require an additional fee to cover the extra gold needed to keep the ring looking the same. Please contact us for details and price. If you do order the ring in an size greater that a 12 and up to a size 14 we will assume that you are comfortable with a thinner shank and a final weight of no more than 21 grams. If you would like to add more gold to the ring you have to contact us within three days of placing the order.
If you find that his setting is too plain we can always add diamonds to the ring or perhaps you have another great idea to embellish this ring to your taste and standards. I welcome any and all inquires so please feel free to contact me.
STONE SETTING: Please note that the center stone has not been fully set. In some listings a space will be seen between the edge of the stone and the bezel edge. I cast these rings to order so the dimensions of the stone and the ring size are adjusted prior to casting.
By casting the ring to order you can order the ring in whatever color you desire and most importantly the center stone can be perfectly and safely set in a ring cast for it. Heavy rings are very difficult to resize so by casting the ring in your size we eliminate any chance of distorting a ring.
This ring is also available as a mounting for your stone, or if you are looking for a particular gemstone please let us know we stock just about every type and if we do not have it we can source it for you.
The last images shows how the ring will be finished and in one of the smaller images you can see the ring on my hand. My little finger is a size 8 and has been added go give you a better sense of scale. I often make these rings for women, so if you are looking to have one made please contact me, I would love to make you a smaller version of this ring, or perhaps a bigger version of it, that is if that is what you would prefer.
This is as fine and elegant a man's ring as you will ever find. The perfect blend of a fine gemstone matched up with a clean classic 18K yellow gold ring. Good solid weight, nicely distributed to give the ring an even weight so that it will not spin. There is nothing worse than a top heavy ring that constantly spins, or flip flops back and forth. A good weighty ring should be balanced so that it stays in place. The beauty of the gemstone set in the 18K gold should be the feature that reminds you that it is there, not the awkward flip flopping of an unbalanced ring.
The base of the shank is approximately 4.5mm wide and rounded on the edges to make it comfortable. The inside of the ring is also solid with smooth sides to help prevent it from moving and most importantly to make the ring comfortable to wear. The widest part of the ring is approximately 11.5 to 12mm. The height of the ring is again approximately 6mm high. The weight of the ring will fall between 19.5 to 21 grams, and as with all the other approximations will vary a little because each of these rings is cast to order and finished by hand. The weight will also vary depending on the ring size you order.
The ring in the images is a size 9, so any larger size up to a size 12 will fall within the weight range. Anything smaller will be slightly lighter, and anything larger that a size 12 will still fall within the same weight range. The only variance will be in the thickness of the shank. The shank will never be less than 2.5mm which is still about 1mm thicker than most men's rings found anywhere else.
If it is important to you that the width of the shank stay thick then please let me know so that I can add more gold to the casting. There will be an additional fee for this service. This ring is available in all sizes, including quarter sizes. The listing is priced for any ring up to size 12, anything larger will require more gold and also more labor to make up a new ring in the larger size. Please contact me for prices and details. I make all these rings to order, so your ring will be cast in your size.
I try to set the center stone level with the top edge of the bezel. If you are interested in having the stone set as low as possible please let me know. I can also set the stone so that it comes in contact with the skin of your finger. Lowering the stone might reduce the overall weight of the ring by no more than 2 grams. Loss of gold weight offsets added labor cost to set your stone to your specs.
In designing this ring I have tried to match a good weight with a nice sized gemstone, not too big, yet not so small that you cannot see it. I have also set the stone deep into the bezel so that the raised edges can offer more protection to the glancing blows that often do the most damage to a large ring's gemstone.
This ring is shown in 18k yellow gold and is also available in 18K White, 18K Rose and 18K green gold. Each of these rings is made to order so there will be slight variations to the finished piece, but only to the overall corners and slopes of the ring. The primary look of the ring in the images will always be consistent. High thick raised bezel, solid shank, and of course the final gold weight which will be close to 20 grams. The thickness of the shank shall be no less than 2.5mm.
All metal is refined in-shop.
Gemstone: Garnet (from Madagascar)
Treatments: Untreated
Specifications: 10x8mm, approx. 2.80 carats
Color: As shown
Clarity: Flawless
Cut: Portuguese cut
All of our rings are solid gold -- never hollow.
Metal: 18K yellow gold. (18K rose, 18K green and 18K white also available for no additional charge). If you would like to save some money this ring can be special ordered in 14K gold (any color). The cost savings will be approximately $250 and no more. Yes, there is less gold but 14K gold is harder to work with and so requires more labor to cast, finish and most importantly to bezel set the gemstone.
Also available in 21K, 22K, 24K gold and Platinum, contact us for prices.
Weight: 19.5 to 21 grams.
Ring size: This ring is available in all sizes from a low of 7 to a high of 12. Larger sizes are available up to a size 18, but will require an additional fee to cover the extra gold needed to keep the ring looking the same. Please contact us for details and price. If you do order the ring in an size greater that a 12 and up to a size 14 we will assume that you are comfortable with a thinner shank and a final weight of no more than 21 grams. If you would like to add more gold to the ring you have to contact us within three days of placing the order.
If you find that his setting is too plain we can always add diamonds to the ring or perhaps you have another great idea to embellish this ring to your taste and standards. I welcome any and all inquires so please feel free to contact me.
STONE SETTING: Please note that the center stone has not been fully set. In some listings a space will be seen between the edge of the stone and the bezel edge. I cast these rings to order so the dimensions of the stone and the ring size are adjusted prior to casting.
By casting the ring to order you can order the ring in whatever color you desire and most importantly the center stone can be perfectly and safely set in a ring cast for it. Heavy rings are very difficult to resize so by casting the ring in your size we eliminate any chance of distorting a ring.
This ring is also available as a mounting for your stone, or if you are looking for a particular gemstone please let us know we stock just about every type and if we do not have it we can source it for you.
The last images shows how the ring will be finished and in one of the smaller images you can see the ring on my hand. My little finger is a size 8 and has been added go give you a better sense of scale. I often make these rings for women, so if you are looking to have one made please contact me, I would love to make you a smaller version of this ring, or perhaps a bigger version of it, that is if that is what you would prefer.
This is as fine and elegant a man's ring as you will ever find. The perfect blend of a fine gemstone matched up with a clean classic 18K yellow gold ring. Good solid weight, nicely distributed to give the ring an even weight so that it will not spin. There is nothing worse than a top heavy ring that constantly spins, or flip flops back and forth. A good weighty ring should be balanced so that it stays in place. The beauty of the gemstone set in the 18K gold should be the feature that reminds you that it is there, not the awkward flip flopping of an unbalanced ring.
The base of the shank is approximately 4.5mm wide and rounded on the edges to make it comfortable. The inside of the ring is also solid with smooth sides to help prevent it from moving and most importantly to make the ring comfortable to wear. The widest part of the ring is approximately 11.5 to 12mm. The height of the ring is again approximately 6mm high. The weight of the ring will fall between 19.5 to 21 grams, and as with all the other approximations will vary a little because each of these rings is cast to order and finished by hand. The weight will also vary depending on the ring size you order.
The ring in the images is a size 9, so any larger size up to a size 12 will fall within the weight range. Anything smaller will be slightly lighter, and anything larger that a size 12 will still fall within the same weight range. The only variance will be in the thickness of the shank. The shank will never be less than 2.5mm which is still about 1mm thicker than most men's rings found anywhere else.
If it is important to you that the width of the shank stay thick then please let me know so that I can add more gold to the casting. There will be an additional fee for this service. This ring is available in all sizes, including quarter sizes. The listing is priced for any ring up to size 12, anything larger will require more gold and also more labor to make up a new ring in the larger size. Please contact me for prices and details. I make all these rings to order, so your ring will be cast in your size.
I try to set the center stone level with the top edge of the bezel. If you are interested in having the stone set as low as possible please let me know. I can also set the stone so that it comes in contact with the skin of your finger. Lowering the stone might reduce the overall weight of the ring by no more than 2 grams. Loss of gold weight offsets added labor cost to set your stone to your specs.
In designing this ring I have tried to match a good weight with a nice sized gemstone, not too big, yet not so small that you cannot see it. I have also set the stone deep into the bezel so that the raised edges can offer more protection to the glancing blows that often do the most damage to a large ring's gemstone.
This ring is shown in 18k yellow gold and is also available in 18K White, 18K Rose and 18K green gold. Each of these rings is made to order so there will be slight variations to the finished piece, but only to the overall corners and slopes of the ring. The primary look of the ring in the images will always be consistent. High thick raised bezel, solid shank, and of course the final gold weight which will be close to 20 grams. The thickness of the shank shall be no less than 2.5mm.
All metal is refined in-shop.
METAL OPTIONS:
14K and 18K gold in ALL colors (yellow, white, rose) are available for each of our items.
Platinum is also available.
If your desired metal is not available as an option on this listing, contact us to inquire and we can provide information and pricing.
SHIPPING:
Standard shipping in the continental U.S. is Free via Priority Mail by the USPS
Expedited and international shipping is available.
International shipping is available anywhere in the world.
EXCHANGE & REFUND:
I offer a full refund or exchange on every non-custom item that I sell.
All items have to be returned in the same condition as received. Damaged or worn jewelry cannot be returned.
There are no refunds on custom work, nor rings that have been customized.
GUARANTEES AND WARRANTY:
All of the material used are 100% genuine, unless stated otherwise in the listing. You could take it to a certified lab for inspection, and if the result came out differently, I will offer you 100% refund.
All pave diamonds are covered up to six months after purchase and will be replaced at no charge in the event that you lose one.
CUSTOM WORK:
Custom work is also available in a variety of forms. Contact us for details, inquiries, or requests.
PLATING FINISH:
All Platinum, 14K white gold, 18K white gold jewelry (rings, bracelets, pendants and Earrings) will be finished with a Super Bright White Rhodium plating. This is a standard practice in the entire industry. If you do not want the final plating please let us know in advance.
This applies only to white metals. All other metals are never plated, but left in the natural state.
Thank you for looking!
