AAAA Amethyst 10x8mm 3.05 Carats Heavy 14K Yellow gold Emerald cut Mans Ring 14 to 15 grams Also available in 18K 3006
Gemstone: Amethyst
Treatments: None
Specifications: 10x8mm, 3.05 carats
Color: As shown.
Clarity: Transparent, no visible inclusions
Cut: Emerald cut
Origin: Brazil
This is a stunning amethyst.
All of our rings are solid gold -- never hollow.
Please note: these rings are made to order, so you will notice that all the center stones are shown positioned on the ring mounting.
This is a fine and classy example of what a bold masculine ring should look like. Perfect for a man, yet not too masculine that a woman could not get away with wearing it. This ring has clean, classic, timeless design, with an elegant classic old world antique look. Set with a good sized gemstone.
Good solid weight with a comfortable low profile. This is a ring that could easily be destined to be an heirloom piece. Solid gold to last forever. A classic old antique style. The perfect blend of a fine gemstone matched up with a simple clean Design that will appeal to any man, or woman. A timeless design that will always be tasteful without being too bold. A statement piece.
This ring will weigh around 14 to 15 grams depending on the ring size you order. The weight is nicely distributed to give the ring an even weight, so it will lay on your finger comfortable without too much play. There is nothing worse than a top heavy ring that constantly spins, or flip flops back and forth. A good weighty ring should be balanced so that it stays in place. The inside of the shank is solid to increase the comfort level of the ring. The beauty of the Gemstone set in a solid gold ring should always be the feature that reminds you that it is there, NOT the awkward flip flopping of an unbalanced ring.
I have tried to match a good weight with a nice sized gemstone, not too big, yet not so small. The center stone is shown loose in the images and sometimes it is shown sitting on the ring. I do this so that you can get a good idea of what the ring will look like with that particular gemstone. All the rings are made to order, so once your ring has been cast and finished I can safely set your gemstone without having to first remove it from another ring.
Those images show a natural Almandine Garnet which is also offered in my store. The last set of images shows how the ring will look once it is finished. High thick raised bezel, solid shank between 4 to 5mm wide, and of course the final gold weight, which will be close to 14 or 15 grams. This might vary a little depending on the ring size you order. The ring in the images is shown in a size 9. I try to keep my men's ring as low as possible, and strive to keep the profile low so that the ring can be comfortably worn on any finger, especially the little Pinky finger.
Every gemstone that I am offering, is one that I would be very happy wearing myself. All are top quality, and all have a very fine cut. The majority of the gemstones offered are one of a kind and once sold will not be available. I do have a large inventory of loose gemstones and more than likely I might be able to find a similar one for you. Please contact us, we would love to be of service to you.
This ring is available in all sizes from a low of 4.5 to a high of 16. Larger sizes are available up to a size 18, but will require an additional fee to cover the extra gold needed to keep the ring looking the same. If you do decide to order a size greater than 12 there will be an additional fee. Please contact us for details and prices.
If you find that the ring is too plain for your taste, and would like to embellish it with some accent stones, please contact us for ideas and options. Since the ring is solid we can set just about any size, or shaped gemstone. These can be set in the shank or perhaps in the bezel.
Metal: This ring is shown in 14k yellow gold and is also available, for no additional charge, in 14K White, and 14K Rose gold. Each of these rings is made to order so there will be slight variations to the finished piece, but only to the overall corners and slopes of the ring. The primary look of the ring in the images will always be consistent. Also available in 18K, 21K, 22K, 24K gold and Platinum, contact us for prices.
This ring is also available as a mounting for your stone, or if you are looking for a particular gemstone please let us know we stock just about every type and if we do not have it we can source it for you.
All metal is refined in-shop.
Gemstone: Amethyst
Treatments: None
Specifications: 10x8mm, 3.05 carats
Color: As shown.
Clarity: Transparent, no visible inclusions
Cut: Emerald cut
Origin: Brazil
This is a stunning amethyst.
All of our rings are solid gold -- never hollow.
Please note: these rings are made to order, so you will notice that all the center stones are shown positioned on the ring mounting.
This is a fine and classy example of what a bold masculine ring should look like. Perfect for a man, yet not too masculine that a woman could not get away with wearing it. This ring has clean, classic, timeless design, with an elegant classic old world antique look. Set with a good sized gemstone.
Good solid weight with a comfortable low profile. This is a ring that could easily be destined to be an heirloom piece. Solid gold to last forever. A classic old antique style. The perfect blend of a fine gemstone matched up with a simple clean Design that will appeal to any man, or woman. A timeless design that will always be tasteful without being too bold. A statement piece.
This ring will weigh around 14 to 15 grams depending on the ring size you order. The weight is nicely distributed to give the ring an even weight, so it will lay on your finger comfortable without too much play. There is nothing worse than a top heavy ring that constantly spins, or flip flops back and forth. A good weighty ring should be balanced so that it stays in place. The inside of the shank is solid to increase the comfort level of the ring. The beauty of the Gemstone set in a solid gold ring should always be the feature that reminds you that it is there, NOT the awkward flip flopping of an unbalanced ring.
I have tried to match a good weight with a nice sized gemstone, not too big, yet not so small. The center stone is shown loose in the images and sometimes it is shown sitting on the ring. I do this so that you can get a good idea of what the ring will look like with that particular gemstone. All the rings are made to order, so once your ring has been cast and finished I can safely set your gemstone without having to first remove it from another ring.
Those images show a natural Almandine Garnet which is also offered in my store. The last set of images shows how the ring will look once it is finished. High thick raised bezel, solid shank between 4 to 5mm wide, and of course the final gold weight, which will be close to 14 or 15 grams. This might vary a little depending on the ring size you order. The ring in the images is shown in a size 9. I try to keep my men's ring as low as possible, and strive to keep the profile low so that the ring can be comfortably worn on any finger, especially the little Pinky finger.
Every gemstone that I am offering, is one that I would be very happy wearing myself. All are top quality, and all have a very fine cut. The majority of the gemstones offered are one of a kind and once sold will not be available. I do have a large inventory of loose gemstones and more than likely I might be able to find a similar one for you. Please contact us, we would love to be of service to you.
This ring is available in all sizes from a low of 4.5 to a high of 16. Larger sizes are available up to a size 18, but will require an additional fee to cover the extra gold needed to keep the ring looking the same. If you do decide to order a size greater than 12 there will be an additional fee. Please contact us for details and prices.
If you find that the ring is too plain for your taste, and would like to embellish it with some accent stones, please contact us for ideas and options. Since the ring is solid we can set just about any size, or shaped gemstone. These can be set in the shank or perhaps in the bezel.
Metal: This ring is shown in 14k yellow gold and is also available, for no additional charge, in 14K White, and 14K Rose gold. Each of these rings is made to order so there will be slight variations to the finished piece, but only to the overall corners and slopes of the ring. The primary look of the ring in the images will always be consistent. Also available in 18K, 21K, 22K, 24K gold and Platinum, contact us for prices.
This ring is also available as a mounting for your stone, or if you are looking for a particular gemstone please let us know we stock just about every type and if we do not have it we can source it for you.
All metal is refined in-shop.
Gemstone: Amethyst
Treatments: None
Specifications: 10x8mm, 3.05 carats
Color: As shown.
Clarity: Transparent, no visible inclusions
Cut: Emerald cut
Origin: Brazil
This is a stunning amethyst.
All of our rings are solid gold -- never hollow.
Please note: these rings are made to order, so you will notice that all the center stones are shown positioned on the ring mounting.
This is a fine and classy example of what a bold masculine ring should look like. Perfect for a man, yet not too masculine that a woman could not get away with wearing it. This ring has clean, classic, timeless design, with an elegant classic old world antique look. Set with a good sized gemstone.
Good solid weight with a comfortable low profile. This is a ring that could easily be destined to be an heirloom piece. Solid gold to last forever. A classic old antique style. The perfect blend of a fine gemstone matched up with a simple clean Design that will appeal to any man, or woman. A timeless design that will always be tasteful without being too bold. A statement piece.
This ring will weigh around 14 to 15 grams depending on the ring size you order. The weight is nicely distributed to give the ring an even weight, so it will lay on your finger comfortable without too much play. There is nothing worse than a top heavy ring that constantly spins, or flip flops back and forth. A good weighty ring should be balanced so that it stays in place. The inside of the shank is solid to increase the comfort level of the ring. The beauty of the Gemstone set in a solid gold ring should always be the feature that reminds you that it is there, NOT the awkward flip flopping of an unbalanced ring.
I have tried to match a good weight with a nice sized gemstone, not too big, yet not so small. The center stone is shown loose in the images and sometimes it is shown sitting on the ring. I do this so that you can get a good idea of what the ring will look like with that particular gemstone. All the rings are made to order, so once your ring has been cast and finished I can safely set your gemstone without having to first remove it from another ring.
Those images show a natural Almandine Garnet which is also offered in my store. The last set of images shows how the ring will look once it is finished. High thick raised bezel, solid shank between 4 to 5mm wide, and of course the final gold weight, which will be close to 14 or 15 grams. This might vary a little depending on the ring size you order. The ring in the images is shown in a size 9. I try to keep my men's ring as low as possible, and strive to keep the profile low so that the ring can be comfortably worn on any finger, especially the little Pinky finger.
Every gemstone that I am offering, is one that I would be very happy wearing myself. All are top quality, and all have a very fine cut. The majority of the gemstones offered are one of a kind and once sold will not be available. I do have a large inventory of loose gemstones and more than likely I might be able to find a similar one for you. Please contact us, we would love to be of service to you.
This ring is available in all sizes from a low of 4.5 to a high of 16. Larger sizes are available up to a size 18, but will require an additional fee to cover the extra gold needed to keep the ring looking the same. If you do decide to order a size greater than 12 there will be an additional fee. Please contact us for details and prices.
If you find that the ring is too plain for your taste, and would like to embellish it with some accent stones, please contact us for ideas and options. Since the ring is solid we can set just about any size, or shaped gemstone. These can be set in the shank or perhaps in the bezel.
Metal: This ring is shown in 14k yellow gold and is also available, for no additional charge, in 14K White, and 14K Rose gold. Each of these rings is made to order so there will be slight variations to the finished piece, but only to the overall corners and slopes of the ring. The primary look of the ring in the images will always be consistent. Also available in 18K, 21K, 22K, 24K gold and Platinum, contact us for prices.
This ring is also available as a mounting for your stone, or if you are looking for a particular gemstone please let us know we stock just about every type and if we do not have it we can source it for you.
All metal is refined in-shop.
METAL OPTIONS:
14K and 18K gold in ALL colors (yellow, white, rose) are available for each of our items.
Platinum is also available.
If your desired metal is not available as an option on this listing, contact us to inquire and we can provide information and pricing.
SHIPPING:
Standard shipping in the continental U.S. is Free via Priority Mail by the USPS
Expedited and international shipping is available.
International shipping is available anywhere in the world.
EXCHANGE & REFUND:
I offer a full refund or exchange on every non-custom item that I sell.
All items have to be returned in the same condition as received. Damaged or worn jewelry cannot be returned.
There are no refunds on custom work, nor rings that have been customized.
GUARANTEES AND WARRANTY:
All of the material used are 100% genuine, unless stated otherwise in the listing. You could take it to a certified lab for inspection, and if the result came out differently, I will offer you 100% refund.
All pave diamonds are covered up to six months after purchase and will be replaced at no charge in the event that you lose one.
CUSTOM WORK:
Custom work is also available in a variety of forms. Contact us for details, inquiries, or requests.
PLATING FINISH:
All Platinum, 14K white gold, 18K white gold jewelry (rings, bracelets, pendants and Earrings) will be finished with a Super Bright White Rhodium plating. This is a standard practice in the entire industry. If you do not want the final plating please let us know in advance.
This applies only to white metals. All other metals are never plated, but left in the natural state.
Thank you for looking!
